• ACT-BIJEENKOMST

    UVS joined a wonderful event organized by RCT-Gelderland. Companies in the Gelderland region joined for inspiring presentations and round table talks on cobots, SMART industry and corporation between traditionally focus companies in steelworkers, machine builders, ICT and agriculture.

    Our SMART sensors could count on a lot of attention because of their may applications in the region and appealing design.

    ACT Meeting agenda (NL)
  • Asset management CMMS

    Industrial ASSET management enters a new era. Machines will provide information on their current, past and future condition and degradation. Automated condition and risk based maintenance scheduling and early equipment maintenance will be standard.

    OpenICM provides a full scale vertical and modular solution for managing your assets throughout their entire life cycle.

    Completeintegration from shop floor to board
    Modularonly pay for use
    SaaSno installation needed
    Scalableapplicable & affordable for one men show up to enterprise level
    Knowledge richfull of ready made models, templates and root causes to get you started

    OpenICM brings together operations, maintenance, suppliers and knowledge owners in order to find an optimal balance between costs, performance and risks. That;s way OpenICM not only provides scheduling but also OEE, FMECA and inventory management functionalities.

    Why invest in asset management?

    Asset management will make all the difference. Depending on the maturity and value chain, the benefits are clear and more effective than production focused improvement programs.

    Food for Though
    Ever wondered why we all tolerate production loss knowing that millions are waisted while investing a same amount would have prevented even more…”

    Optimal effect through vertical integration

    UVS Offers an integral solution from SENSOR up to STATEGIC level dash boarding.

    In this way company goals (KPI’s) on each level can be aligned and bench marked against real actions, budgets, goals and availability.

    To bring together IT and OT environments, UVS provides “IIoT Engine”, this solution enables communication between IIoT devices and OpenICM or any Third party software.

    OpenICM puts continuous improvement into practice. All modules are designed to improve future actions, advice and planning.

    Strategic

    Overall performance and risks. Planning for new investments. Market positioning and liability. Resource management.

    • Dashboards
    • Quality reporting
    • OEE

    Executive

    Are assets and resources available, what risks are we taking, do we need budget. Optimize balance between costs and risks.

    • Material management
    • Resource management
    • FMECA
    • P&L Planning

    Operational

    Does operational and maintenance schedules align. Which priorities do I set, What resources do I commit.

    • Task planning
    • Asset state report
    • Permits

    Professional

    Asset technical and performance information. Permits and procedures to follow. Scheduling tasks, materials and tools.

    • Documents
    • Assets information
    • Instructions & Procedures

    Easy integration

    BNR Grenzeloos ondernemen

    Grenzeloos Ondernemen #006 vanaf de 33e editie van de Hannover Messe in Duitsland. We haken aan bij de Economische missie voor Nederlandse start-ups van de Rijksdienst voor Ondernemend Nederland en Startup Delta.

    Te gast zijn prins Constantijn van Oranje, special envoy van Startup Delta. En ondernemers Wilma Mulder, directeur KxA Data Solutions. Boudewijn Wisse, CEO van Laevo. Eveliene Langedijk, CEO van UVS Industry Solutions. En Hans Roeland Poolman, Sales & Business Development bij Technobis. Presentatie Folkert Tempelman.

    Als nieuweling in de Duitse markt duurt het meestal wel drie tot vijf jaar voordat je überhaupt een deal kunt sluiten. De bedrijven lijken dan ook nog een beetje voorzichtig, zegt de Prins: 'Ik denk dat we wat kunnen leren van de plekken waar innovatie soms wat harder gaat, zoals Sillicon Valley. Men houdt hier misschien nog iets te voorzichtig de kaarten aan de bost, terwijl daar juist erg gul wordt omgegaan met contacten.'

    Door de ondernemers en bedrijven met elkaar in contact de brengen, kan een eerste stap gezet worden: 'Je moet ergens beginnen', aldus Prins Constantijn. 'Maar als ze die stap hebben gezet, en ze staan hier, dan moet je ook zorgen dat ze toegang krijgen tot de juiste bedrijven. En dan moet je ook durven hen over die drempel heen te helpen.'

    Luister naar de uitzending

    (Bron : BNR nieuws)

  • Building Information

    The step from design to maintenance is smaller than often thought off. Most buildings and factories are designed using computer aidied design tools and more often using standard blocks according to BIM*.

    We at UVS are able to convert this data into assets information ready to schedule and manage maintenance from the day the building or installation is commissioned.

    • Export BIM data from CAD tools to OpenICM
    • Add predictability information to most BIM items
    • Provide a dashboard based on floor(s) layout
    • Combine building and machine maintenance

    *Building Information Model

  • Component selection

    Selection guide
    Purchase options
    Security & Desaster recovery

     

     

     

     

  • Contact & Distributors

    Raster Products b.v.
    Distributor, The Netherlands
    Oude Maasdijk 30
    6621 AC Dreumel
    +31 (0)487 57 27 19
    info@raster-products.com

    VTS Technical Support BV

    Integrator, The Netherlands
    Saksenweg 42h
    5349 BX Oss
    +31 (0)314-842939
    http://VTS-Group.nl


    SAAM (PTY) LTD
    Distributor, South Africa
    +27 31 7006171
    P.O. Box167 Kloof
    1 Hawthorn Park, 1 Hawthorn Road
    Westmead, Durban

    ITSME
    Reseller, The Netherlands
    Steurweg 2 - 4941 VR
    Raamsdonksveer
    +31 162 - 484 200
    info@itsme.eu

  • Data logging & processing

    Your control systems collects a wealth of information, however this information is only available for a few seconds and used to control and monitor your system. Via EVDL you are able to log, analyze and store data from your control system and put it to purpose of predictive maintenance.

    So it’s a datalogger? Well no, the EVDL is much more than that... besides logging data (up to 1 Tb) from virtually any control system, the EVDL is able to do (real-time) complex calculation and make analyses on datasets to predict degradation or error situations.

    Why is this so special? Because degradation occurs over longer periods in time. The device is capable to find trends and situation that might cause system failure. Besides long term analyses it also does real-time FFT and RMS value analyses.

    EVDL combines complex tasks with ease of configuration and programming. The device can be linked to 3th party maintenance system or just any (custom) (cloud based) application.



    Download EVDL flyer
    • Web interface for configuration & visualization
    • Ethernet interface
    • Native Siemens S7 communication
    • OPC-UA client communication
    • 32Gb internal flash memory
    • Backup battery which enables full operation for at least 5 days without external power supply
    • 9 - 24 VDC powersupply required
    • Configuration via Bluetooth LE

    Options Most common application of the EDVL is to place the EDVL inside an existing control cabinet.

    The EDVL has an IP50 qualification hence should be protected. UVS offers standard enclosures including powersupply, wall mount, cable glands and antenna throughput.

    Local Analyses

    Why should you use up all your bandwidth to transfer RAW data for analyses to your local server? With OpenICM, analyses function are device on your local computer and processing is done locally. This saved a lot of data communication and analyses is done while not even connected to a network.

    Typical configuration

    Typically the EVDL will be connected the a PLC where data is extracted via the native data communication protocol. For this no alteration of the PLC programming or configuration will be necessary. Communication between EDL and PLC is one way, so the EVDL cannot alter anything inside the PLC is it only reading data.

    To overcome security issues and change in the existing IT infrastructure, the EVDL sends data via 3G connection to the desired server or host platform.

    ERL sensor units can be connected via HF (High speed Fieldbus) or private LoRa / WiFi to the EVDL and so contribute to the data collection.

    Easy setup & monitoring

    An EVDL can be configured via web interface or Bluetooth LE. Via the Android APP you will be able to configure but also monitor and retrieve data.

    The built-in Bluetooth connector enables local (10 meters max.) configuration and readout via smartphone, tablet or laptop. Field service engineers are able to access logging data, machine documents and maintenance history data.

    ...
  • Experience Center

  • Export voucher

    Eveliene Langedijk, CEO UVS Industry Solutions, kreeg een export voucher uitgereikt uit handen van special envoy van StartupDelta, Constantijn van Oranje. 'Dankzij de exportvoucher ben ik in de gelegenheid om ons promotiemateriaal in het Duits te laten vertalen zodat we straks op de Duitse beurzen goed voor de dag kunnen komen. GO4EXPORT heeft me ook in contact gebracht met diverse mooie contacten in Duitsland. Zo kunnen we een vliegende start maken met onze exportplannen richting Duitsland'.

    De vouchers van GO4EXPORT kunnen aangevraagd worden via De Groeiversneller. De Groeiversneller is het Gelderse ondersteuningsprogramma voor groeiende ondernemers. Deze exportvouchers hebben een maximale waarde van €10.000,- en kunnen ingezet worden voor bijvoorbeeld het doen van marktonderzoek, het maken van promotiemateriaal voor internationaal beursdeelname of het doen van een taaltraining.

  • Hannover MESSE 2018

    HannoverMESSE 2018, again a great success. Thanks to Dutch IT and FME, innovative companies like ours could count on lots of attention and new business leads trough out the world.

    Eveliene Langedijk, CEO UVS Industry Solutions (upper left picture) and Business Development executive Nathalya Groot (upper right picture) have proven that female lead companies break barriers for innovative and new approaches that help pave the way for the factory of the future.

    During the MESSE, we introduced our latest innovation, a wireless, battery powered sensor unit for monitoring and recording multiple asset behavior parameters. This unit compliments our vertical solution for predictive maintenance.

    Dutch state secretary of economics mrs. Mona Keijzer (lower left picture) emphasized the innovative power of the Dutch industry that could be beneficial to all European counties. UVS Industry Solutions is proactively stimulating and sharing innovations trough out the European market supporting a more effective and strong technology driven europe.

  • HannoverMESSE 2017

    As part of the Dutch innovation and smart industry booth, we can look back on a very successful Hannover MESSE 2017. Thanks to the MESSE organisation and FME who did a wonderful job.

    Thanks to many government initiatives, start-ups and start-up ambassador Prince Constantijn, The Netherlands keeps on leading industrial innovations. We are proud to contribute to this.

    This year we will introduce to your our newest products ERL+ and OpenICM Lite for IIoT users and small service and maintenance providers.

  • Hannovermesse 2017

    As part of the Dutch innovation and smart industry booth, we can look back on a very successful Hannover MESSE 2017. Thanks to the MESSE organisation and FME who did a wonderful job.

    Thanks to many government initiatives, start-ups and start-up ambassador Prince Constantijn, The Netherlands keeps on leading industrial innovations. We are proud to contribute to this.

    Next year we will of course be present with new and exiting Asset Management innovations so see you next year at the Hannover MESSE 2018.

  • History

    "UVS Industry Solutions" was founded by Ronald S. Kok (BSc) in 2001. He started with the development of CLOUD applications, user-friendly scheduling software that provided added value to his consultancy services. Although originally intended to be used by consultants and project managers, industrial companies also became very interested in using these applications, so he decided to launch it as a separate product, called OpenICM.

    OpenICM has become a revolutionary way to schedule maintenance and to support all kinds of Business Improvement tasks. What makes OpenICM unique is the combination of Competence Management, Resource Management, Production Planning and LEAN / 6Sigma.

    Since 2015 development of OpenICM has taken a tremendous leap and we can proudly say that OpenICM has become the most advanced, elaborate Asset management systems in the world. Leveraging deep learning and IIoT connectivity to gain the best asset and maintenance performance while still being easy to use.

    November 2015 Eveliene Langedijk joins UVS as CEO and Business Development executive and UVS split into technical consultancy and asset performance, paving the way for further development of both activities.

    Since august 2018, UVS Industry Solutions is located at the “Gericke process experience center” in Hoevelaken, The Netherlands. Our new office & facilities allow our clients to experience predictive maintenance in various real life machinery like mixers, pump, screw transport etc.

    Today UVS is leading the way utilizing new technologies the enhance business performance and put Industry 4.0 / SMART industry into practice.

  • HMS & UVS @ SPS2017

    For the second year UVS SMART Maintenance solution can be seen at our partner stand HMS @ Hal 10 SPS2017 Nurnberg. A great show, where we introduced our SMART sensors for predictive maintenance. This device will enable the application of an eWON in high resolution data intensive environments like vibration monitoring.

    HMS introduces the NEW eWON flexy that has a smaller building width to enable more easy integration into new an existing control-cabinet arrangements. Our Remote asset management solution can hence be implemented more easy in new and existing machines.

  • HMS & UVS @ SPS2017

    For the second year UVS SMART Maintenance solution can be seen at our partner stand HMS @ Hal 10 SPS2017 Nurnberg. A great show, where we introduced our SMART sensors for predictive maintenance. This device will enable the application of an eWON in high resolution data intensive environments like vibration monitoring.

    HMS introduces the NEW eWON flexy that has a smaller building width to enable more easy integration into new an existing control-cabinet arrangements. Our Remote asset management solution can hence be implemented more easy in new and existing machines.

  • ICT+ IA Knowledge event 2018

      Ronald Kok (UVS Industry Solutions) gives a lecture: "How do you deploy smart (me) sensors for predictive maintenance?" How do you make smart use of all data that you already measure or collect, consciously or some cases unconsciously. What measurements are being made now and how can you supplement these with other measurements so that you also get a correct story for maintenance? And how do you make useful data for predictive maintenance from the collected data? Do you want to start with Predictive Maintenance? Then you should not miss this lecture.
  • Integration

  • MaintemanceNEXT2017

    This year UVS Industry Solutions bv. together with its partners Raster and Bosh Rexroth are joining the Dutch leading trade fair for maintenance and asset management Maintenance NEXT2017. You can find us at booth 6.403.

    Maintenance NEXT is interesting for those who are owners and operators of assets such as process installations, machines, energy plants, infrastructure, structures, aircraft and vessels, as well as maintenance managers, buyers, engineers and technicians looking for maintenance solutions and innovations.

    Mainetance NEXT2017

  • Maintenance 360

    Maintenance is shifting from a necessity to a key role in every organization. Whether you a producing company that needs to meet the ever higher demand of customers or your a machine builder that shifts to a servitization model rather than a sell & service model, change is ongoing and organizations need to adopt and change.

    To achieve these goals in a world where skilled resources are scares and price differences have reduced to a minimum. Predictive maintenance can and will make the difference.

    Automated Predictive Maintenance

    To predict asset degradation is one, to continuously monitor and take action at the right moment is and other story. OpenICM takes predictive maintenance to the next level.

    Via easy to configure function blocks for each asset you can convert behavior (models) knowledge into actions. Whether the knowledge / model is from an OEM-er, Consultant or from your own brew you can now combine knowledge and take it into action.

    Request a Demo

    One modular integrated solution

    We know that the transition from reactive to predictive maintenance is a step by step process. That is why OpenICM is completely scalable, so take a small steps by recording assets, report breakdowns and when you are ready start predicting certain behavior. Take the journey as far a you need up to automated scheduling and degradation prediction.

    UVS Offers an integral solution from SENSOR up to STATEGIC level dash boarding.

    In this way company goals (KPI’s) on each level can be aligned and bench marked against real actions, budgets, goals and availability.

    To bring together IT and OT environments, UVS provides “IIoT Engine”, this solution enables communication between IIoT devices and OpenICM or any Third party software.

    Download module selections sheet

     

    Keep control over the puzzle

    Keeping all things in mind so they perfectly align while complying to everybody’s whishes will often be a enormous challenge. Especially when situations change most often compromises are made. OpenICM keeps all strings attached and moves along changing situations easing your mind so you can focus on getting things done.

    OpenICM contains automated function for material, tools and resource planning that are fixed to maintenance tasks. So all necessities are planned along with the maintenance plan. When you change the date of maintenance all dependencies move along with is.

     

    Reduce field time & enlarge your coverage

    Have technicians in a car, plane or walk over for an inspection is a washed of time and capacity. There are may options to remotely execute a first line analyses and have machines report their status autonomously.

    OpenICM offers all connections from SMS, Remote access up to Video streaming. We believe that remote maintenance should be as easy as making a telephone call so all our remote solution are click and go. Via our partners HMS and Bosch we offer high quality industrial grade systems.

  • Maintenance Gorinchem 2018

    For her debut edition in the Netherlands, the Maintenance trade fair is working together with industry association NVDO (Dutch Association for Effective Maintenance).

    NVDO focuses on the entire Asset Management chain, representing approximately 300,000 maintenance professionals with a total turnover of 30-35 billion euros.

    The trade association will support the fair by supplying a part of the knowledge program of which the first speakers and topics are now being announced.